Configuring Zoom and Pan Settings
Introduction
Enable Link Zoom Pan so that all linked images display with the same physical size and are panned to the same location. By default, Link Zoom Pan is enabled (selected) for the MG modality. By default, other modalities are not enabled.
Steps
- To access User Settings, do one of the following:
|
If you want to do this... |
Complete these steps... |
|---|---|
|
Open User Settings from the Viewer. |
Right-click
User Settings |
|
Open User Settings from the Worklist. |
Click
User Settings |
|
Open User Settings from PowerJacket. |
Click
User Settings |
. 
on the Worklist
toolbar.- Click Image Display and select Cross Reference.
- Select which modalities (MG, CT, PET, and MR) you want to enable Link Zoom Pan for.
- Do one of the following:
|
If you want to do this... |
Choose this option... |
|---|---|
|
Link different view orientations (sagittal, axial, coronal, oblique) when using Link Zoom Pan. |
Select the Link different view orientations check box. |
|
Link the same view orientation when using Link Zoom Pan. Only images in the same orientation zoom and pan together. |
Clear the Link different view orientations check box. |
Results
Synapse automatically saves any updated options and displays the following message in the bottom left corner of the window: Successfully saved.
Synapse displays the following message to alert you that an action must be taken for the settings to apply: Refresh the Synapse browser window for settings to apply.
Related Topics